The project of the house 147 sq.m from profiled beams

[buldozer]

I have a fence of 140 meters, I'll pour just the tape from the front (from the street). The rest of the fence – metal posts with jumpers and a wooden fence painted to match the house.
As for the warm floor – a cranial block, a rough floor, a vapor barrier, an insulation, OSB, or DSP, a waterproofing, a foil, a metal fence 100 x 100, it rolled out the contours of a warm floor and highways along the walls for radiators and electrics, and I pour a tie 5 cm. On top there is a tile or a laminate for the warm floor. In short, whatever you want.

[buldozer]

Over the weekend, I measured the humidity from 11 to 19. I made 5 or 6 observations. I measured in the ends.
But the photo of moisture is coming soon. But there was less -22 - 28.

[bill]

But I dont even know why I had such a humidity of outside walls, it feels good inside, considering that the beam of a natural moisture after 3 weeks of test measurement and compare. How are you doing?.

[buldozer]

It dries.
I'm still thinking. How to cover the roof and what color to paint.
In the meantime, I decided to do a blind area. And the concrete slab must somehow filled in the rest room, a steam room and a washing - but it's slowly until August and September I think to do it.

[constructor]

And communications have been already at home?. What about the sewer?.

[bill]

This is not my main home, but a guest bath-house.
I made the drain in the form of well- a pit 3 m of deep, a sandy soil. Water + heating are from the boiler, it is 3 meters from the building. There is a central sewage system, but it is above the level of the structure at 1-1.5 m, and to get there you have to do many things, to break and to dig (a boiler room, a garage).

[Summer]

Tell me, please, what kind of sander is needed for sanding timbers?.

[bill]

The rough polishing was produced by "Bulgarian" with spade emery wheels. It requires certain skills (so to kill at some places). Then we used a tape machine. If you go to "zero", you probably will have to use another stroke surface grinding.

[bill]

For the grinding you need two machines - surface and eccentric, preferably, with a maximum, adjustable offset.
To begin with seeds 40, finish with 80-100.

[baltazar]

On the previously posted topic there was such photo, I'm all about closing the gaps. It's just a fine mesh in a wooden frame?.

[buldozer]

In the picture there is a mosquito net in the bar frame 25. You are worried very early about closing openings. Let stand open them until the fall.
p.s. perhaps it is time to create a fund for the exchange of such products, you can also exchange the sliding attachment to the rafters.

[constructor]

Is it enough? or you need a circular one?. And if both are needed, then use a vibratory one?.

[expert]

If you do not let the secret, please give me coordinates of a contractor-built house, is it possible?? in PM. …I m also looking for a home.

[baltazar]

That’s a question!. Is it possible to make a rough floor of the first floor like this, as not to lose the altitude on the floor insulation.

[bill]

And the answer!.. Of course you may do it, especially, if it is possible to fasten the screw at the bottom. The subfloor is well antiseptized by “Bohemitom Forte”, it applies even to pieces of wood in contact with the ground.

[Summer]

Good afternoon. A very nice and beautiful house!!.
Tell me the budget for the house, please, in PM.

[buldozer]

So I am only making the blind area..
And thinking about the roof cover --- a soft roof or a metal?.
And I am still looking for the windows..
Oh, I choose the color. I am not in a hurry!!.

[bill]

Maybe, but I do not think it will be greatly disturb to paint a house and to make a permanent roof. I will have only to protect it a little ...

[Summer]

Good afternoon!!
Can I also have an estimate in PM…We are going to build a similar house, only smaller and a slightly different design. Particularly, we are interested in the cost of work in detail.
By the way, we are "fellow countrymen", we have also a dasha in the Naro-Fominsk region. thank you in advance!.

[bill]

Ohh, already!. And where do you have the site?. If anyone wants to know about the quote, just throw in a personal mail. Dear forum mates!. Tell me please, what kind of sills are the best for the firt floor and how to strengthen them to the beams, so as not to flow the water on the shelf?. And are there the sils of 4 meters, and without breaking them?.